Technical Specifications; Ordering Information - Zhone ADSL2+ Reach & High Performance Specification Manual

Technical Specifications

Dimensions
2.6" x 17" x 10.4" (HxWxD)
66mm x 432mm x 265mm (HxWxD)
Power
Source:
- DC: -42 to -56V, Dual A+B feeds
- AC: 100-240VAC/47-63 Hz
Power:
- 65 watts (nominal)
- 96 watts (max)
Interfaces
2 x 50-pin RJ-21 (LINE Interfaces)
2 x 50-pin RJ-21 (POTS Interfaces)
2 x 100/1000BaseT
2 x SFP Based GigE
Serial Craft, Alarm Relay

Ordering Information

ADSL2+ IP-DSLAM
BITSTORM-RP2-151-AC-EU
BITSTORM-RP2-151-DC
BITSTORM-RP2-152-AC-NA
BITSTORM-RP2-152-DC
BITSTORM-RP-153-AC-EU
BITSTORM-RP-153-DC
FIBER SFP
SFP-GE-LX-1310-DLC
SFP-GE-SX-850-DLC
Bitstorm-RP
Standards Support
ADSL2+
- G.992.1
- G.992.2
- G.992.3
- G.992.5
- G.Bond
DHCP Option 82
IGMP Snooping and Proxy
Protocol Support
RFC 2684 Bridged Encapsulation
IEEE 802.1Q VLAN w/ 802.1p Priority Queuing
IGMPv2
MAC and Host Address Filtering
Secure-IP and Secure-VLAN
48-PORTS ADSL2+ (BRCM), ANNEX A, 600 OHM SPLITTERS (REV 2), 2+2 FE/GE, EURO AC POWER
48-PORTS ADSL2+ (BRCM), ANNEX A, 600 OHM SPLITTERS (REV 2), 2+2 FE/GE, DC POWER
48-PORTS ADSL2+ (BRCM), ANNEX A, 900 OHM SPLITTERS (REV 2), 2+2 FE/GE, NA AC POWER
48-PORTS ADSL2+ (BRCM), ANNEX A, 900 OHM SPLITTERS (REV 2), 2+2 FE/GE, DC POWER
48-PORTS ADSL2+ (BRCM), ANNEX B, ISDN SPLITTERS, 2+2 FE/GE, EURO AC POWER
48-PORTS ADSL2+ (BRCM), ANNEX B, ISDN SPLITTERS, 2+2 FE/GE, DC POWER
LONG-REACH (10KM) DUPLEX OPTICAL GIGABIT ETHERNET
SHORT-REACH (500M) DUPLEX OPTICAL GIGABIT ETHERNET
Management
SNMP, Embedded WEB Server, Telnet, CLI,
RADIUS client support for management access
Bandwidth/Distance
Up to 28Mbps (single line ADSL2+)
Up to 48Mbps (2 lines bonded)
Regulatory Compliance
ITU-T K.20
ETSI 300-019, 300-386
EN 60950
CE Conformance
RoHS
Operating Requirements
Operating (DC): -40ºC to 65ºC
Operating (AC): -10ºC to 65ºC
Storage: -40ºC to 80ºC
Relative Humidity: 5% to 95% (non-condensing)
17 December 2010 11:35:56