TechnoTrend TT-micro S2810 User Manual page 61

Failure
signal strength ok,
but no signal quality
No reception of
service that was
received properly
before
No, bad or disturbed
video
Device does not
follow the remote
control commands
Devices suddenly
switches off
Recording does not
work
TT-micro S2810
Possible cause
a different satellite
than expected
Service no longer
available
Interference with
other devices like
WLAN devices,
DECT or mobile
devices
Antenna is not
aligned correctly
LNB is broken
HDMI, SCART or
VIDEO Cable not
properly plugged in
Channel information
has changed
Wrong video format
Device does not
support selected
HDMI settings
Obstacle between
remote and receiver
Corrupt data stream
Batteries empty
The automatic switch
off feature is active
This device does not support recording
Troubleshooting
Solution
change setting to the
correct satellite
None
Increase distance
between devices
Improve antenna
alignment using the
display (INFO-key)
Exchange LNB
Check connectors
Apply automatic
channels search
Change video format
Change HDMI
settings
Remove obstacle
Plug off power supply
unit and plug it in
again
Put in new batteries
Switch off this feature
in the Power settings
Troubleshooting
¡ ¢ £ ¤
61
¥
¦
§
¨
©