Danger Of Injuries By Other Causes - TechnoTrend TT-micro S2810 User Manual

Safety and Environmental Protection
Danger caused by electricity

3.3 Danger of injuries by other causes

50
¥
¦
§
¨
©
• Plug the unit's power supply into a properly installed
and sufficiently fused 230V wall outlet only.
• Make sure there is ready access to the wall outlet in
case you need to pull the plug quickly.
• Leads must neither be claimed nor squashed.
• Do not operate the appliance if the unit or its leads are
visibly damaged or after you dropped it.
• If an apparent damage occurs (e.g. smoke or similar)
during operation, immediately disconnect the electric
power supply from the power outlet. Always pull at the
plug and not at the cable.
• Do not put too much load on wall outlets and
extensions because otherwise run a risk of a fire!
When purchasing, ask for the maximum admissible
power consumption (see "Technical data").
• Unplug the power supply from its wall outlet to
completely disconnect the unit from the mains.
• Always have qualified experts do receiver repairs or
change receiver settings. The manufacturer accepts
no liability for accidents of the user if the device is
opened. Connecting other than the rated power
sources or consumers may cause unit malfunction or
failure.
• Do not modify the appliance.
• Use provided cables and power supplies only.
• Thunderstorms may damage appliances still
connected to the mains. Always unplug the power
supply from the wall outlet when there is a
thunderstorm.
• If not used for a longer period, disconnect the receiver
from the plug and internet connection. This also
applies to devices connected to the receiver.
• Ensure that leads cannot be tripped over.
TT-micro S2810