Connect Your Stereo (Optional); Connect The Receiver To Mains - TechnoTrend TT-micro S2810 User Manual

Start-up
Connect your receiver
• Best option (HDMI, required for HDTV reception): Connect the
• Second best option (SCART): Connect the SCART socket of
• Third best option (VIDEO): Connect the VIDEO and AUDIO

4.2.3 Connect your stereo (optional)

You can connect your stereo or external audio amplifier to the
receiver using a proper electrical (Cinch) SPDIF cable.

4.2.4 Connect the receiver to mains

1. Plug the 12V jack of the power supply unit into the receivers
2. Plug in the power supply unit to a mains socket.
54
¥
¦
§
¨
©
HDMI socket of your receiver with a HDMI socket of your TV
with a proper HDMI cable (not included).
NOTE
If you connect your receiver with a TV capable of CEC
you possibly can control basic functionalities of your
receiver using the TV's remote. Please consult the
manual of your TV set.
your receiver with a SCART socket of your TV with a proper
SCART cable (not included).
R/L sockets of your receiver with the corresponding sockets of
the TV with a proper 3xCinch cable (not included).
ATTENTION
Only use a properly installed 230 V ~ 50 Hz mains
socket. Please do not switch on the device until all
other devices have been switched on.
DC IN socket.
TT-micro S2810