C) Automatic Power-Off; D) Setting The Video Format; E) Deleting All Pictures And Videos; F) Distance Counter - VOLTCRAFT BS-1500T Operating Instructions Manual

c) Automatic power-off

With this function, you can set the time after which the device automatically powers off if no recording is running or
a button is pushed.
• Navigate (A7/A8) to the menu item "AUTO POwER Off" and open it (A9).
• Select the desired time (A7/A8) and confirm with "OK" (A9).
If you choose "DISABLE", the function is off.
The following times are available (in minutes): 5, 10, 15, 20
• The menu is closed automatically and the display returns to preview mode.

d) Setting the video format

To set the video format for using the video output, proceed as follows.
• Navigate (A7/A8) to the menu item "VIDEO fORmAT" and open it (A9).
• Select either "PAL" or "NTSC" (A7/A8) and confirm with "OK" (A9).
• The menu is closed automatically and the display shows the standard display.
PAL is the European Tv standard. NTSC is mostly used in North America. The standard you use depends on
the Tv you have.

e) Deleting all pictures and videos

To delete all recorded pictures and videos from the inserted memory card, proceed as follows.
• Navigate (A7/A8) to the menu item "DELETE ALL" and open it (A9).
• Select "yES" (A7/A8) and confirm with "OK" (A9).
• The menu is closed automatically and the display shows the standard display.
All pictures and videos that are in the recording folder "100DCSCIM" are then deleted. The "100" at the beginning
of the folder may also change. The recording folder is in the folder "DCIM" on the memory card.

f) Distance counter

The endoscope has a function integrated with which you can determine the length of the object that you are inspect-
ing with your camera.
When the function is active, the length is displayed in the display (D3).
• To configure the function, navigate (A7/A8) to the menu item "LENGTh mEASURE" and open it (A9).
• The menu item "RESET" resets the currently displayed length.
Open the item with "OK" (A9), switch (A7/A8) to "yES" and confirm again with "OK" (A9).
• The displayed unit (cm, m, inch, feet) can be selected in the submenu "UNIT".
• You can switch the function on and off in the item "Disable/Enable".
37