Usage Recommendations - Silvercrest SBP 1960 A1 Operating Instructions Manual

Place the hanger
the front of the appliance. Push the locking stud
over it until the locking stud
Fig. 1: Attaching the hanger
NOTE
► To remove the hanger
the hanger
Now pull the nylon balloon
the bottom of the nylon balloon
Insert the plug into a suitable mains socket.
The appliance is now ready for use.

Usage recommendations

■ Suitable materials are cotton, linen, silk and flannel.
■ Stretchable, knitted and crocheted garments and woollen clothing are not
suitable. Stretchable garments could lose their shape.
■ The clothes to be dried should have been spun at at least 400 revolutions
per minute in the washing machine. Do not allow machine-spun clothes to
dry first. The textiles should only be damp, not dripping wet!
■ The drying process for a machine-spun shirt takes approx. 10 minutes.
However, the duration may vary depending on the material and moisture
content. Longer drying times may be necessary, especially for heavier
fabrics.
■ To protect your clothes, always start with a shorter drying time and extend it
if necessary.
SBP 1960 A1
on the telescopic shaft
engages (Fig. 1).
if necessary, push the locking stud
upwards.
over the hanger
over the top edge of the cable retainer
so that the curved arms face
in and slide the hanger
in and pull
. Pull the elastic drawstring at
GB │ IE │
.
25 ■