Usage Recommendations - Silvercrest SBP 1960 A1 Operating Instructions Manual

Upright shirt steamer
Hide thumbs Also See for SBP 1960 A1:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 52
Fig. 1: Attaching the hanger
NOTE
To remove the hanger
the hanger
Now pull the nylon balloon
the bottom of the nylon balloon
Insert the plug into a suitable mains socket.
The appliance is now ready for use.

Usage recommendations

Suitable materials are cotton, linen, silk and flannel.
Stretchable, knitted and crocheted garments and woollen clothing are not
suitable. Stretchable garments could lose their shape.
The clothes to be dried should have been spun at at least 400 revolutions
per minute in the washing machine. Do not allow machine-spun clothes to
dry first. The textiles should only be damp, not dripping wet!
The drying process for a machine-spun shirt takes approx. 10 minutes.
However, the duration may vary depending on the material and moisture
content. Longer drying times may be necessary, especially for heavier
fabrics.
To protect your clothes, always start with a shorter drying time and extend it
if necessary.
SBP 1960 A1
if necessary, push the locking stud
upwards.
over the hanger
over the top edge of the cable retainer
in and pull
. Pull the elastic drawstring at
GB │ MT 
 57
.

Advertisement

Table of Contents
loading

This manual is also suitable for:

305777

Table of Contents