10.5 Simple weighing
A warm-up time is required for stabilisation (see chpt. 1).
Wait for zero display, reset to zero using TARE.
Place the goods to be weighed and close the wind screen doors
Wait until the stability display appears [ ].
Read weighing result.
When an optional printer is connected, the weighing value can be edited.
Print-out example with enabled GLP function (see chpt. 8.3):
Print-out example with disabled GLP function (see chpt. 8.3):
34
- - - - - - - - - - - - - - - - -
KERN & Sohn GmbH
TYPE ABJ 220-4NM
SN WBIIAB000I
ID 1234
- - - - - - - - - - - - - - - - -
50.0010 g
-SIGNATURE-
- - - - - - - - - - - - - - - - -
50.0010 g
Company
Model
Serial no.
Balance identification no. (see chpt. 8.4)
Measuring Value
prepared by
Measuring Value
ABS-N_ABJ-NM-BA-e-1715