KERN ABS-N Series Operating Instruction page 147

12.3 Auto Tare function
1. Call up menu
 Press TARE for 3 sec. in weighing mode.
2. Select function
 Press the navigation buttons ( ) repeatedly
until „A.TARE" is displayed. The current setting is marked
by the stability display ( ).
With stability display ( )
Without stability display ( )
3. Enable/disable function
 Press TARE
4. Return to weighing mode
 Press ON/OFF repeatedly or for 3 sec.
ABS-N_ABJ-NM-BA-e-1715
Function turned on
Function switched off

51