KERN ABS-N Series Operating Instruction page 165

0. Call up menu
 In weighing mode press the MENU button twice
1. Select function
 Press the navigation buttons ( ) repeatedly until
„TOOLS" is displayed.
 Confirm with PRINT
 Press the navigation buttons ( ) repeatedly
until „CHECK.W" is displayed. The current setting is
marked by the stability display ( ).
Further steps depend on the desired setting:
Stability
Function
display ( )
yes
no
2. Set limit values
When entering the limit values ensure that the values match logically one
with another, i.e. the lower limit value must not be greater than the upper
one.
If not considered, the balance will adapt the limit values automatically.

Press the navigation buttons ( ) repeatedly until
„HI.LIM" is displayed.
 Press TARE. The current setting will be displayed.
 Use the navigation buttons ( ) to enter the desired
value, see chpt. 3.1.1 „Numeric input".
ABS-N_ABJ-NM-BA-e-1715
set/update

Press PRINT and
ON
continue with step 3.

Press TARE and
off
continue with step 3.
cancel
Press TARE and
continue with step 4.
continue with step 4.
69