Installation; How To Prepare The Weighing Balance - KERN YDB-03 Operating Instruction

4.3 Installation

4.3.1 How to prepare the weighing balance

• If necessary, carry out necessary adjustment before installation of the density
set.
• Correct adjustment is no longer possible after the density kit has been
installed.
• For reasons of adjustment, take away the density set and place the standard
weighing plate.
 Disconnect scale from power supply.
 Remove standard weighing plate and accessories such as screening ring and
weighing plate carrier.
Example of illustration KERN AES-C
14
1
2
3
Example of illustration KERN ABS-N / ACS
/ABT
YDB-03-BA-e-1410