Tethering&Portable Hotspot - Navitel T500 3G AUTO Manual

32 | USER MANUAL
Another way to enable Bluetooth:
1. Go to Application Menu >
2. Find the "Bluetooth" entry.
3. Use the toggle on the right to turn it on/off.
Connecting devices via Bluetooth
1. Tap on the Bluetooth entry to see the Bluetooth settings.
EN
The entry at the very top displays the name of your device
and indicates whether it is visible to other Bluetooth
devices. Tap on the entry to toggle the visibility of your
device.
2. The "Available devices" section below shows the devices
that your device can currently see. Tap on a device's entry
to pair with it. Another section will appear, titled "Paired
devices", where all the Bluetooth connections to your
device will be displayed.
3. To unpair a device, press
entry, then press "Unpair".
Tethering&Portable hotspot
You can share your device's data connection with other devic-
es. First, enable your mobile Internet connection. Then, go to
Application Menu >
Networks" section press "More...", then "Tethering&portable
hotspot". You will see several sharing options.
Settings.
on the right in the device's
Settings and in the "Wireless&-
Wi-Fi hotspot
1. Tap on the entry to configure your Wi-Fi hotspot.
2. Press "Set up Wi-Fi hotspot". A window will pop up.
3. Choose a name for your network and type it in the "Network
SSID" text field.
4. Choose a security protocol for your network or leave it
open.
5. Enter a password to protect your network, if necessary.
6. Set the maximum number of allowed connections (1-8).
7. Press "Save".
8. Use the toggle in the top right corner to turn on the
hotspot.
USB tethering
Share Internet connection between two devices via USB cable.
1. Connect your device to the other device.
2. A USB icon will appear in the Status Bar. In the list of
notifications you will see "Connected as a media device" (or
other connection mode). It does not matter for tethering.
3. Go to Application Menu >
under "Wireless&Networks"
"Tethering&portable hotspot".
4. Tick the checkbox on the right in the "USB tethering" entry.
Settings,
select "More... " , then