3. Disassembly and Reassembly
3-2. Standard disassembly drawings
► This is a standard disassembly diagram and may differ from the actual product.Use this material as a reference
when disassembling and reassembling the product.
Part
Figure
Description
1. Remove the two screws holding the Top Cover at the back of the
unit.
ASSY COVER TOP
2. Remove the top-cover by lifting it up after pulling it back about
15mm.
3. With the top cover removed you will now have access to service
the Water pressure sensor, EMI Noise Filter, Hot and Cold Water
Valves, Hose Draw ASSY.
20/54