3. DISASSEMBLY AND REASSEMBLY
3-1. TOOLS FOR DISASSEMBLY AND REASSEMBLY
Tool
Socket
Wrench with
6" Extension
Open End
wrench
Vice pliers
Others
(Driver, Nipper, Long
Type
Heater (1)
10mm
Motor (1), Balance (5), 2 holes of each left and
13mm
right of the shock absorber 1 Pulley hole
19mm
Replaceable for the box driver.
10mm
Since the bolt runs idle when the box driver is
13mm
used, use the box driver 17mm.
19mm
Tool to protect the idle and abrasion of the bolt
for the box driver.
General tools for the after service.
nose)
Remarks
Removal and Reassembly _ 9