Samsung WF455ARG Series Training Manual page 29

3. Disassembly and Reassembly
3-2. Standard disassembly drawings
► This is a standard disassembly diagram and may differ from the actual product.Use this material as a reference
when disassembling and reassembling the product.
Part
DRAIN PUMP
(Continued)
Figure
◆ Check Points for Troubleshooting
1. Separate the Drain Filter and check if any alien substances are inside the pump (e.g. coins, buttons, etc.)
→ Remove these if found.
2. Check if the wire connector for the Drain Pump ASSY has come loose. Reconnect if necessary.
3. When water leaks, check the assembly status of the Clamp Hose, and Cap Drain → Take the relevant countermeasure if
necessary.Turn the filter cap counterclockwise, clean and remove any material that has collected.
Description
4. Remove the 2 screws holding the Drain Pump.
5. Drain the remaining water through the drainage hose.
6. Disconnect the wire connector.
7. Push it back and lift it up.
28/54