Samsung WF455ARG Series Training Manual page 27

3. Disassembly and Reassembly
3-2. Standard disassembly drawings
► This is a standard disassembly diagram and may differ from the actual product.Use this material as a reference
when disassembling and reassembling the product.
Part Figure Description
3. Impose a force slowly in the direction of the arrow designated in
the figure on the left until the hook B is removed. Then remove the
water level sensor.
► Assembly
WATER LEVEL
1. Connect the pressure hose to the body of the water level sensor
SENSOR and lock it using the clamp.
※ When connecting the water level sensor to the set, make sure to
(The Hook type)
connect it after draining water by operating the spin cycle.
2. To fix the body of the water level sensor, insert the hook into the
square hole of the bracket spring until a "click" sound is heard.
26/54