Related Manuals for Bona FlexiSand AMO310000
Summary of Contents for Bona FlexiSand AMO310000
- Page 1 Bona FlexiSand Manual and safety instructions AMO310000 | AMO310010 Translation of manual in original...
- Page 2 Index 1. Technical data 2. Safety instructions 3. Repairs, Service and Maintenance a. Service b. Spare parts and exploded views 4. Warranty 5. Bona FlexiSand in general 8-10 a. Normal use b. Risks c. Sanding 6. Handling 10-16 a. Working with Floor Pads b.
-
Page 3: Technical Data
Carefully read through the entire user manual before you begin working with the machine. If anything is unclear, turn to your reseller with confidence or to Bona Safety instructions Read through the safety instructions carefully and inform your employees and users, so no one comes to harm when using the machine. - Page 4 Bona FlexiSand DANGER means that you or other staff can suffer a serious injury or death if THE INSTRUCTIONS MARKED WITH DANGER ON THIS MACHINE OR IN THESE USER INSTRUCTIONS are ignored or are not followed. Read the entire user manual before you use the machine.
- Page 5 Never use a machine for anything else other than sanding, polishing and oiling of wooden floors. Service or repairs performed by unauthorized persons can cause damage or accidents. If service and repairs are performed by unauthorized persons, the warranty may become invalid. Service and repairs must be performed by Bona or retailers authorized by Bona.
- Page 6 The machine may never be cleaned using a high pressure washer or hose. Spare parts and exploded views On the Internet, you will find a list of spare parts and exploded views for Bona FlexiSand and other machines in our product range.
-
Page 7: Warranty
During the factory warranty period, service or repairs may only be carried out upon approval by a manager at Bona Division Sanding and only performed by staff at Bona AB or approved staff at Bona AB Division Sanding. - Page 8 Bona FlexiSand Bona FlexiSand in general Font Handle Button high/low speed (230V version) Back Handle Attachment for vacuum cleaners Buttons for the switch lock Dust skirt Placement of extra weight Hour meter Power outlet Lock for foldable shaft (230V version)
- Page 9 Normal use Bona FlexiSand is only intended for indoor use at temperatures between +10°C (50°F) and +35°C (95°F) and in good lighting. If it is used in any other manner, this is against applicable provisions.
- Page 10 Bona Scrad system. Bona Scrad is a thin brown pad, approx. 380 grain, which is used together with a small sanding paper in the form of a triangle. Fix the sand paper to the pad so that the tip points toward the middle. Try to centralize the Scrad as much as possible in order to avoid vibrations and wobbling.
- Page 11 Bona FlexiSand Assembling the dust skirt Place the dust skirt in the intended notch on the rubber strip. NOTE! Never use the dust skirt when oiling. Always remove the skirt when transporting the machine! Working with Sanding Screens (Diameter 407mm (16”), Grit size P60-P220) 1.
- Page 12 Bona FlexiSand Working with abrasives (Diameter 407mm (16”), Grit size P16-P220) 1. Mount the sanding disc, loosen the centre 2. Mount the rubber pad. screw. NOTE! Loosen clockwise! 3. Place the abrasive. 4. Tighten the centre screw. NOTE! Tighten counter clockwise! Adjusting the handle shaft 1.
-
Page 13: Starting The Machine
If you hold the handle in mid-position the machine will work on the spot. Warning! If you have not operated a Bona FlexiSand previously! Ensure that no one or nothing is nearby before you start the machine. Test first on a large empty surface with only a pad, this makes the machine easier to maneuver. - Page 14 Attaching a vacuum cleaner. For minimized dust environment use a vacuum cleaner intended for wooden dust. Just attach the vacuum cleaners hose to the 38mm tube on the Bona FlexiSand. The air flow on the vacuum cleaner should at least be 245m3/h.
- Page 15 Bona FlexiSand Changing the coal brushes (only 230V, not 115V) Must be done after approx. 700 hours Remember to remove the power cable from the machine before service! 1. Remove any extra weight. 2. Loosen the screws on the motor cover.
-
Page 16: Transport Position
Bona FlexiSand Transport position 1. Tip the machine backwards and remove 2. Remove the sanding disc. the dust skirt. 3. a) Raise the handle to an upright 4. a) Grip the machine as per the photo. position, pull out the front carry handle and fold the handle shaft. - Page 17 Bona FlexiSand Manufacturer: Division Sanding Vallgatan 45, SE-716 31 Fjugesta, Sweden Tel.: +46 (0)40 38 73 90 Fax: +46 (0)585 204 Manual Edition1.0...
- Page 18 EU assurance of conformity As per directive 98/37/EC, appendix IIA and 2006/42/EC applying after 2009-12-29 We hereby guarantee that Bona FlexiSand with article number: AMO310000 beginning from serial number 0901AMO310001 AMO310010 beginning from serial number 0901AMO310001 fulfils the requirements in the Council’s directives: 98/37/EC, and 2006/42/EC applying after 2009-12-29, on machines.