Setting Up The Mouse - Dicota Store User Manual

nism, the mouse can work as easily as wired mice and as conveniently as
wireless mice and is perfect for your Notebook or laptop.
Safety notice
1. This product complies with IEC 60825-1, class 1 laser product.
2. Your product complies with FCC and CE rules.
3. This product has no serviceable parts. Use of controls or adjust-
ments of procedures other than the user guide may result in
danger.
CAUTION:
Change or modifications not expressly approved by the manufacturer
responsible for compliance could void the user's authority to operate
the equipment.

Setting up the mouse

Store is connected to your computer via a USB cable, which needs to be
plugged into your computer's USB port.
Flip over the mouse and open the cap
on the bottom. Hold the mouse in one
hand, pull out the USB cord and adjust
it to your desired length. Make sure to
place the cord into the hold properly
and lock the cap. Finally, plug the
USB connector into the USB port of
your computer.
For USB port installation
Windows 98 (or higher) is required for USB port
installation. Connect the receiver cable to the
USB port on the computer. For Windows,
you may be prompted to insert the Windows software CD. Insert the
Drivers' CD into the computer's CD-ROM driver when asked to do so and
follow the instructions steps.
3
USB Port