Quick Start Guide By Remote - EcoSmart A9A19A60WESDZR1 Use And Care Manual

Quick Start Guide by Remote

NOTE: LED Bulb (A) and the remote (B) in the pack are already paired at the factory.
1
Screw the LED Bulb (A) into a standard E26 socket and make sure
it is powered on.
2
Prepare the Remote (B) and remove the Plastic Battery Strip (FF)
beneath the Battery Covering (JJ), Indicator Light (AA) will begin to
blink indicating the power is on.
3
You are good to go now! Follow the instructions below to control
your lights.
Operation
ON/OFF
□
Press the ON/OFF button
Dimming
□
Press the dimming button
5%-100%.
□ There are two ways to change the brightness with the dimming button
(CC):
□
Short presses on the button change the brightness in a step manner.
□
Holding down the button continuously, changes the brightness with a
smooth transition.
CCT Tunable
□
Press the CCT Tunable button
□
There are two ways to change the CCT with the CCT Tunable button
□
Short presses on the button change the color temperature incrementally.
□
Holding down the button continuously changes the color temperature with a smooth transition.
Memory
□
Three preferred settings can be stored by using the memory function.
□
To change the three default settings, change the LED bulb to the preferred dim setting and CCT, then hold
down the memory button
indicating that the settings have been stored into memory.
□
After 3 settings have been stored, the next setting will replace the rst stored setting.
□
Press the memory button
NOTE: The new mode will replace the last setting you executed, as the remote can only keep three
modes at most in its memory.
Touch-Link
If you want to add an additional LED Bulb apart from the existing LED Bulb to the remote and this additional
LED Bulb hasn't paired with any remote before, Please follow the steps below, which is called "Touch-Link".
(BB) to turn the light ON or OFF.
(CC) to change the brightness from
(DD) to change the color temperature from 2700K to 6500K.
(EE) for 3 seconds. The indicator light (AA) on the remote will blink once,
(EE) to execute the memory function.
(DD):
5
Please contact 1-877-527-0313 for further assistance.
Remote On/Off
Dimmable Light
Customize Your
White Light Temperature
3 Custom Light
Memory Settings
One Remote Controls
up to 20 Lights
HOMEDEPOT.COM/ECOSMART