Takegawa 09-07-2711 Instruction Manual

Instruction Manual for Compact Cool Oil Cooler Kit
Item No.
Fits
・Thank you for purchasing one of our TAKEGAWA-made products. Please strictly follow the following instructions in installing and using the kit.
・ Before installing the kit, please be sure to check the kit contents. Should you have any questions about the kit, please contact your local motorcycle
dealer.
◎ Please note that, in some cases, the illustrations and photos may vary from the actual hardware.
Please read the following instructions before installation.
◎ We do not take any responsibility for any accident or damage whatsoever arising from the use of the kit not in conformity with the instructions in the
manual.
◎ We shall be held free from any kind of warranty whatsoever of products other than this product if the glitch takes place on the other products than
this one after the installation and use of this product.
◎ You are requested not to contact us about the combination of our products with other manufacturers'.
◎Please note that this kit is designed for exclusive use in the above-mentioned models with above mentioned frame numbers but equipped with our
TAKEGAWA-made die-cast clutch cover and that it cannot be mounted on any other models.
◎Please order repair parts referring to Item Nos and reference Nos described in this manual. Should you have any questions about the products, please
kindly contact your local motorcycle dealer.
◎Installation of this kit requires detachment and reinstallation of a tank and other work. We recommend you to refer to the relative HONDA service manual
for the correct work.
◎ A ring on the frame harness needs to be either bent or cut off for the installation of this kit. Additionally, a harness wire clip needs to be removed.
However, all these do not affect the safe driving at all.
◎ You cannot use this Kit when a standard exhaust system is in use on your motorcycle.
The following show the envisioned possibility of injuries to human bodies and property damage as a result of disregarding the
CAUTION
following cautions.
・Always try to drive your motorcycle at a legal speed, abiding by the laws.
・Work only when the engine and muffler are cool. (Otherwise, you will get burned.)
・Do the installation with right tools. (Otherwise, breakage of parts or injuries to you may take place.)
・Always use a torque wrench to screw bolts and nuts tight and securely to the specified torque.
(Otherwise, these parts may get damaged or fall off, resulting in accidents.)
・As some products and frames have sharp edges or protruding portions, please work with your hands protected.
(Otherwise, you will suffer injuries.)
・Before riding, always check every hardware for slack in parts like screws. If you find slack ones, screw them securely up to the specified torque.
(Otherwise, improper tightening may cause parts to come off.)
・ Always use new gaskets and packings. And check those parts, to be reused, for wear and damage. If you find worn or damaged parts, replace
them with new ones.
・As the installaiton of this kit has to do with lubricant agents, be sure to check oil level before starting the engine. If the oil level is low, add the oil.
Moreover, change the oil when the bike already travelled the distance to the point where the oil change is stipulated in the service manual.
The following show the envisioned possibility of human death or serious injuries to human bodies as a result of disregarding the
WARNING
following warnings.
・Always start the engine in a well-ventilated place, and do not turn on the engine in an airtight place.
(Otherwise, you will suffer from carbon monoxide poisoning.)
・When you notice something abnormal with your motorcycle while riding, immediately stop riding and park your motorcyle in a safe place to check
what has gone wrong. (Otherwise, the abnormality could lead to accidents.)
・Before doing work, make sure your motorcycle is secure on level ground for safety's sake.
(Otherwise, your motorcycle could overturn and injure you while you are working.)
・Check or carry out maintenance of your motorcycle correctly according to the procedures in the instruction manual or service manual.
(Improper checking or maintenance could lead to accidents.)
・ If you find damaged parts when checking and performing maintenance of your motorcycle, do not use these parts any longer, and replace them with
new ones. (The continued use of these damaged parts as they are could lead to accidents.)
・Keep plastic bags for packing the products out of children's reach, or discard them.
(If children get them on, there will be a danger of their suffocating.)
・As gasoline is highly flammable, never place it close to fire. Make sure that nothing flammable is near the gasoline. Since vaporized accumula tion
of gasoline is at high risk of explosion, work in a well-ventilated place. (Otherwise it may cause a fire.)
◎ Please be informed that, mainly because of improvement in performance, design changes, and cost increase, the product specifications and prices
are subject to change without prior notice.
◎ This manual should be retained for future reference.
：０９−０７−２７１１ 3-fin, silver (for die-cast clutch cover)
：０９−０７−２７１２ 4-fin, silver (for die-cast clutch cover)
：Monkey・Monkey (FI) / BAJA・Gorilla (Models equipped with a die-cast clutch cover)
(Mount-on-Frame, Rubber Hose Type)
‑ 1 ‑
Sep./29/ 09