Operating Sequence; G Washing 4.5 Kg Of Withe Cotton At 95°C; Load The Laundry; Measure Out The Detergent - Zanussi ZJD 1285 Instruction Booklet

Operating Sequence

Before the first wash, we recommend that you run a
cotton cycle at 60°C, without any laundry in the
machine, to remove any manufacturing residue from
the drum and tub.
Pour 1/2 a measure of detergent into the dispenser
drawer and start the machine.
Washing 4.5 kg of white cotton
at 95°C
Suppose you have 4.5 kg of normally dirty laundry to
wash. It is white cotton and is suitable for high
temperature washing.

1. Load the laundry

Open the door by pulling the door handle outwards.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible. Close the door.

2. Measure out the detergent

Pull out the dispenser drawer until it stops.
Measure out the amount of detergent required and
pour it into the main wash compartment
If you wish to carry out the prewash, pour detergent
into the compartment marked
.
.
7

3. Measure out the fabric softener

If required, pour fabric softener into the compartment
marked (the amount used must not exceed the
"MAX" mark in the drawer).
Close the drawer gently.

4. Select the required option(s)

Depress HEAVY SOIL and/or SPIN REDUCTION and/or
QUICK WASH and/or RINSE HOLD PLUS button, if
required.

5. Select the required programme

Turn the programme selector dial clockwise to the
programme B or A if you wish to perform the prewash
before wash.