Start The Machine; At The End Of The Programme - Zanussi WDA 1055 W Instruction Booklet

6. Start the machine

Before starting up the machine check that:
I the appliance is plugged in
I
the water supply taps are turned on
I the drain hose is correctly and securely positioned
I
the door and the detergent dispenser drawer are
closed.
Depress the ON/OFF button: the mains-on light will
illuminate and the machine starts operating.

7. At the end of the programme

The machine stops automatically.
If you have selected the RINSE HOLD option
machine will stop with the water left in the tub,
to prevent the fabric from creasing. To drain only, select
position or the drain programme "S".
To drain and spin, select programme "H" or turn the
spin speed selector dial to the maximum speed position:
the machine will spin at the max. speed provided for the
performed programme.
The door is controlled by a safety device which releases
2 minutes after the end of the programme.
Switch the machine off by depressing the ON/OFF
button again. The mains-on light goes out.
When the programme has finished you are advised to
unplug the appliance and turn off the water taps.
, the
8