Start The Machine; At The End Of The Programme; Washing 2.5 Kg Of Mixed Fabrics At 50°C; Load The Laundry - Zanussi ZWD 1261 W Instruction Booklet

6. Start the machine

Before starting the machine check that:
the appliance is plugged in
the water supply taps are turned on
the drain hose is correctly and securely positioned
the door and the detergent dispenser drawer are
closed.
Depress the "On-Off" button: the mains-on light will
illuminate and the machine starts operating.

7. At the end of the programme

The machine stops automatically.
If you have selected the "R
machine will stop with the water of the last rinse left in
the tub, to prevent the fabric from creasing. To drain
only, select position "
NO SPIN
"S".
To drain and spin, select programme "H" or turn the
spin speed selector dial to the desired speed position: the
machine will spin at the selected speed .
The door is controlled by a safety device which releases
2 minutes after the end of the programme.
Switch the machine off by depressing the "On-Off"
button again. The mains-on light goes out.
When the programme has finished you are advised to
unplug the appliance and turn off the water taps.
H " option, the
INSE OLD
" or the drain programme
WASHING 2.5 KG OF MIXED FABRICS AT 50°C
Suppose you have 2.5 kg of Mixed Fabrics to wash.
They are rather delicate fabrics and should not be
washed at a high temperature.

1. Load the laundry

Open the door by pulling the door handle outwards.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible.
Close the door.

2. Measure out the detergent

Pull out the dispenser drawer until it stops.
Measure out the amount of detergent required and pour
it into the main wash compartment
3. Measure out the fabric
softener
If required, pour fabric softener into the compartment
marked (the amount used must not exceed the
"MAX" mark in the drawer).
8
.