The Control Panel - Zanussi WDA 1055 W Instruction Booklet

The Control Panel

1 Programme guide
2 Drying time selector dial
Graduated up to 120 mins for cottons (black section)
and synthetics, (grey section) this dial allows you to
select the desired drying time according to the type and
quantity of laundry and the required degree of dryness.
Turn the dial clockwise only.
Cooling phase
To allow the laundry to cool down, a cooling phase
starts automatically 10 minutes before the end of drying
and this phase must in no circumstances be reduced or
interrupted.
3 Drying indicator light
This light illuminates when the machine is drying.
4 Mains-on light
This light illuminates when the machine starts working
and goes out when the ON/OFF button is released.
5 On/Off button
By depressing this button the machine starts operating.
When depressed again, the machine stops.
6 HALF LOAD button
Select this button to reduce water
consumption on the rinse cycle when washing a smaller
load of cottons or linens (maximum load size = 2.5
kg).
7 Spin speed selector dial
This dial allows you to select the desired spin speed or
the following options:
= no spin. All the spinning phases are excluded.
I
To be used for items that tend to wrinkle. If position
is selected for cotton items (programmes 95°, 60°
and 40°), the machine will perform an extra rinse (4
instead of 3).
= Rinse Hold. The water of the last rinse is not
I
emptied out to prevent any creasing in the clothes if
they are left damp in the drum.
If you select the Rinse Hold option
automatic washing & drying programme the
machine will not dry.
The spin speeds on the dial refer to cotton programmes.
For mixed fabrics and wool, position 1000 or 1200
corresponds to 850, for delicates 650 rpm.
Position 450 corresponds to 350 rpm for delicates.
8 Programme selector dial
Turn the dial clockwise to select the required wash and
drying programme.
Before setting the dial to any position the machine must
be switched off by depressing the ON/OFF button
again.
6
in an