Explanation Of The Structure Of The Safety Instructions; Descriptions In Figures; Responsibility Of The Operating Company - bar agturn PKT Series Operating Manual

1.3.2 Explanation of the structure of
the safety instructions
A safety instruction is initiated with a signal
word describing the severity of the danger
( „Chapter 1.3.1 Signal words and symbols" ).
WARNING
Type or source of danger (possibly
with warning signs according to DIN
EN ISO 7010)
Consequences in case of not following
the instruction
• Avoidance of danger

1.3.3 Descriptions in figures

The figures in this operating manual are
intended to help you understand the facts
and procedures.
The descriptions in the figures are exem-
plary and may differ slightly from the actual
appearance of your product.
PKT-GD/GS-IM-DE-B-EN-09-19 Rev.0
1.4 Responsibility of the
operating company
• The installation, electrical and pneumatic
connection as well as the commission-
ing of the product may only be carried
out by qualified personnel in accordance
with the instructions described in this
operating manual.
• The product may only be operated and
maintained by personnel of the legal
minimum age and the corresponding
personnel qualification.
•
This operating manual is an integral part
of the product and must be available to
the personnel at all times. This operating
manual must be read and understood
before the first commissioning.
•
The operating and technical personnel
must be instructed about safety devices
of the product as well as safe working
methods.
• The product may only be operated in
perfect condition. No safety devices
may be removed or disconnected.
7