Realfiction DEEPFRAME ONE User Manual page 7

4. Insert the USB stick to the sound bar, holding the specific configurator file for either DeepFrame One or DeepFrame
Basic Kit. This is needed to setup your OLED Screen's picture, sound and power settings settings. If you have a DeepFrame
One, your toolbox already has a USB stick with the correct configurator file on it. If you have a DeepFrame Basic Kit, you
can download the correct configurator file from the support page on our website.
5. Flip the OLED Screen around and gently place it on the protective foam again, front side up. Important: Always
make sure to handle the connection cable with care. Never pull or apply force to it, as this might damage the
part where the cable is attached to the screen.
7