Realfiction DEEPFRAME ONE User Manual page 11

3. Then gently tilt both the Leg Frames back and forth to adjust the height position of the hologram.
4. When you are satisfied, adjust the feet to maintain the height positioning and tighten the bolts again
underneath the OLED Housing
5. Loosen the screws for the Screen Adjuster located in each side, and tilt the OLED Screen to obtain the same
angle as the DeepFrame Optical Lens. This step is to eliminate distortions in the hologram.
6. When done, tighten the screws on the Screen Adjuster again, making sure that the position is the same for each side.
11