Specifications - Handler IV Operator's Manual

• Tank: Polyethylene, cone bottom.
• Capacity: 230 US gallons or 870 liters.
• Subframe: Steel
• Fittings: fiberglass filled polypropylene
• Hose: braided clear PVC (pressure side) or EPDM suction (suction side of system).
• Clamps: all stainless steel.
• Lid: two 15" diameter, polypropylene, hinged.
• Height: 44" with lid on (not including steel subframe), 48" with steel subframe.
• Width: 47"
• Length: 56" (tank only, no plumbing attached), 76" with steel subframe and plumbing attached.
NOTE: Specifications subject to change without notice.
Page 24

6. SPECIFICATIONS