Table of Contents
Advertisement
Figure 5.2 Knife system inside tank
Figure 5.3 Suction Valve - drawing from nurse tank position
Figure 5.4 Puncture Jug
Page 16
Figure 5.5 Jug Rinse Valve
Figure 5.6 RotoFlush Valve
6
Open valve #1 (suction valve) to allow mixture to be
drawn from Handler tank. (See Fig. 5.7)
7
Open Valve #3 (discharge valve) to allow mixture to
be delivered to sprayer. (See Fig. 5.8)
Repeat Steps #5 to #7 as necessary to rinse tank.
8
To fill remainder of tank (if applicable), open suction
valve (Valve #1) to "draw from nurse tank position", and
open (or keep open) valve #3 (discharge valve).
9
When desired sprayer tank volume is achieved, close
valve #3 and move valve #1 to off position and turn off
pump.
Advertisement
Table of Contents
