Table of Contents
Advertisement
Figure 5.7 Suction Valve Drawing from the Handler
Figure 5.8 Open Position
B) Mixing Dry and Packaged Products,
recirculation Instructions for Both Liquid
and Dry Products
1
Close all valves and open left lid (no knife in opening).
2
With all Valves Closed, start nurse pump.
3
Turn three-way valve (valve #1) so it is drawing water
from nurse tank. (Fig 5.3)
4
Open one or both valves #4 & #6 (agitation valves)
and fill Handler tank with appropriate amount of water to
mix product. (Fig. 5.9 & 5.10)
5
Slowly pour product into Handler tank.
Figure 5.9 Left Agitation Valve
Figure 5.10 Right Agitation Valve
Hint: Use left opening to prevent contamination of knife.
6
Turn valve #1 (suction valve) to "draw from Handler
tank position". (Fig. 5.7)
7
Adjust agitation by adjusting agitation valve(s)
(valves #4 & #6) and/or adjusting pump motor speed if
gasoline engine driven (Fig. 5.9 & 5.10)
Page 17
Advertisement
Table of Contents
