Table of Contents
Advertisement
•
Before starting, read chemical manufacturers'
warnings, instructions and procedures and follow them
exactly.
•
Post the Poison Control Emergency telephone
number for your area on sprayer before using agricultural
chemicals. The appropriate number can be found in the
inside of your telephone book. Have container label handy
when seeking medical attention.
•
Review all safety related instructions with all personnel
annually.
•
Do not put hands into the Handler when adding
product.
•
Wear safety goggles, rubber gloves and protective
clothing whenever working with the Handler or on a
machine or a component containing toxic products. Keep
all shields and guards in place when operating.
Safety Decals
1
Keep safety decals and signs clean and legible at all
times.
2
Replace safety decals that are missing or have become
illegible.
3
Replaced parts must have current safety decal.
4
Safety decals or signs are available from your dealer
parts department.
How to Install Safety Decals
1
Be sure that the installation area is clean and dry.
2
Decide on the exact position before you remove the
backing paper.
3
Remove the smallest portion of the split backing paper.
4
Align the decal over the specified area and carefully
press the small portion with the exposed sticky backing in
place.
5
Slowly peel back the remaining paper and carefully
smooth the remaining portion of the decal in place.
6
Smaller pockets can be pierced with a pin and
smoothed out using the piece of decal backing paper.
Page 9
Advertisement
Table of Contents
