Setup--Hardware Test - Anviz A series User Manual

Setup--Hardware Test

In the management interface, select [Setup]-[Hardware Test] and press
[OK] to test Keypad, LCD, Voice, Sensor and Flash.
Keypad
Test the keypad.
Select [Keypad] and press [OK].
Press any key on the keypad. If LCD shows the same, the keypad is good.
LCD
Test the LCD.
Select [LCD] and press [OK].
Press [OK] to start test.
Test the terminal voice.
Voice
Select [Voice] and press [OK].
Terminal auto tests 1-17 voices.
Sensor
Test the sensor's luminance.
Select [Sensor] and press [OK] .
The luminance value will be changed according to the environment.
Hardware Test
▼
Keypad
LCD
Voice
Keypad
Current Key
3
Esc-C
Esc-C Next-OK
Voice
Section 01-17
Esc-C
Sensor
LUM 167
Esc-C
26