System Menu - Anviz A series User Manual

System Menu

Please press [M] to enter system management menu under initial state.
Since anyone can enter the terminal's management menu under initial state by pressing [M],
we suggest you set the admin shortly after installation of the terminal.
The method of registing admin is the same for common employees. Please refer to "User
Enrollment" and "Admin Setup" instructions.
Verify the admin to enter the system management menu.
There are two ways to verify admin:
1. Fingerprint verification: Let the person who is expected to be the admin place his/her finger
on the sensor to verify.
2. Password verification: Enter the admin's ID and password, press [OK] to confirm.
Enter the system management menu after the admin verification is successful.
If the admin verification is OK, it will enter the system management menu.
IN
09 : 00
26
10-11-17 WED
Admin? IN
09 : 00
26
10-11-17 WED
MENU
User
Setup
USB Flash
11