Headlights - Triumph Tiger 900 Series Owner's Handbook Manual

Maintenance

Headlights

Warning
Adjust road speed to suit the visibility
and weather conditions in which the
motorcycle is being operated.
Make sure that the head light beam is
adjusted to illuminate the road surface
sufficiently far ahead without blinding
oncoming traffic.
An incorrectly adjusted headlight may
impair visibility causing an accident.
Warning
Never attempt to adjust a headlight
beam when the motorcycle is in
motion.
Any attempt to adjust a headlight
beam when the motorcycle is in
motion may result in loss of control
and an accident.
Do not cover the headlight or lens with
any item likely to obstruct air flow to,
or prevent heat escaping from, the
headlight lens.
170
Caution
Caution
Covering the headlight lens during
operation with
luggage, adhesive
intended to alter
headlight beam
headlight lens covers will cause the
headlight lens to overheat and distort,
causing irreparable damage to the
headlight assembly.
Damage caused by overheating is
not considered
defect and will not be covered under
warranty.
If the headlight must be covered
during use – such as taping of
the headlight lens required during
closed-course conditions
headlight must be disconnected.
Caution
The use of non-approved headlight
units may result in damage to the
headlight unit and/or motorcycle.
Use a genuine
headlight unit as specified in the
Triumph Parts Catalog.
Always have replacement headlight
units installed
Triumph dealer.
Continued
items of clothing,
tape, devices
or adjust the
or non genuine
a manufacturing
– the
Triumph supplied
by an authorized