Right Handlebar Switches - Triumph Tiger 900 Series Owner's Handbook Manual

Always get replacement keys from
your authorized
Replacement keys must be 'paired' with
the motorcycle's immobilizer by your
authorized Triumph dealer.

Right Handlebar Switches

The switches
on Tiger 900
Tiger 900 Rally Pro.
5
4
3
2
1
1. HOME button
2. Engine start/stop switch
3. START position
4. RUN position
5. STOP position
6. Hazard warning lights switch
The following sections describe the
handlebar buttons
functions.
HOME Button
The HOME button is used to access the
main menu on the instrument display.
Press and release the HOME button
to select between the main menu and
instrument display.
Triumph dealer.
are illuminated
GT Pro and
6
and switches
General Information
Engine Stop Switch
In addition to the ignition switch being
turned to the ON position, the engine
stop switch must be in the RUN position
for the motorcycle to operate.
The engine stop switch is for emergency
use. If an emergency arises which
requires the engine to be stopped, move
the engine stop switch to the STOP
position.
Note
Although the engine stop switch stops
the engine, it does not turn off all
the electrical circuits and may cause
difficulty in restarting the engine due
to a discharged battery. Ordinarily, only
the ignition switch should be used to
stop the engine.
Do not leave the ignition switch in
the ON position unless the engine is
running as this may cause damage
to electrical components and will
discharge the battery.
Starter Button
The starter button operates the electric
starter. For the starter to operate,
the clutch lever must be pulled to the
handlebar.
Note
Even if the clutch lever is pulled to the
handlebar, the starter will not operate
if the side stand is down and a gear is
engaged.
Caution
29