Triumph Tiger 900 Series Owner's Handbook Manual page 57

It is necessary to use a positive pedal
force to make sure there is a smooth
gear shift.
To enable/disable TSA:
• From the Bike Set Up menu, push
the joystick down to select TSA
(SHIFT ASSIST)
joystick to confirm.
• Push the joystick down/up to scroll
between ENABLED and DISABLED.
• Press the joystick center to confirm
the required selection.
• The display will then return to the
Bike Set Up menu.
For more information on Triumph Shift
Assist (TSA), see page 105.
Bike Set Up–Turn Signals
The turn signals can be set to Auto
Basic, Auto Advanced or Manual mode.
and press the
General Information
Selecting a Turn Signals Mode
To select the required turn signals mode:
• From the Bike Set Up menu, push
the joystick down to select TURN
SIGNALS and press the joystick
center to confirm.
• Push the joystick
scroll between AUTO BASIC, AUTO
ADVANCED and MANUAL.
– Auto Basic – The self-canceling
function is on. The turn signals
will activate for eight seconds
and an additional 71 yards (65
meters).
– Auto Advanced – The
canceling function is on. A short
press activates the turn signals
for three flashes. A longer press
activates the turn signals for
eight seconds and an additional
71 yards (65 meters).
– Manual – The
function is off. The turn signals
must be
using the turn signal switch.
• Press the joystick center to confirm
the required selection.
• The display will then return to the
Bike Set Up menu.
down/up
self-
self-canceling
manually canceled
57
to