Between Boards - 123electric Smart BMS gen 3 Manual

Between Boards

To battery +
To battery -
LED
BMS IN
BMS OUT
123electric
The Netherlands
E-mail: info@123electric.eu
www.123electric.eu
Mount hole for the 'plus'-pole of the cell.
Solder a wire on the solder pad and connect this wire to the minus (-)
side of the cell.
Indicator LED, Flashes when data will be received / send, continuous
ON when the board is balancing.
Data input from the previous cell board. Use one of the two holes.
Data output to the next cell board. Use one of the two holes.
21