Dashboard - 123electric Smart BMS gen 3 Manual

Dashboard

The overview dashboard shows you all
information you like to know.
The Solar panel shows the status of the
incoming energy, next to this graphic
presentation you will find details like:
Incoming charge current, Incoming power,
harvest energy today, total of harvest energy.
The battery shows the SOC (state of charge) of
the battery pack. Next to this graphic
presentation you will find details like: State of
charge percentage, Incoming / outgoing
current of the battery, Stored power in kWh,
Incoming / outgoing power, Total battery pack
voltage.
123electric
The Netherlands
E-mail: info@123electric.eu
www.123electric.eu
If the BMS is newly mounted on the battery
pack, the SOC may not show the correct
value. There is a red exclamation mark next
to the SOC percentage. Charge the battery
pack until all cell voltages are above V-
balance. The SOC will then be set to 100%.
The red exclamation mark will disappear.
This SOC recalibration happens every time
the battery pack is fully charged.
The light bulb shows the status of the
outgoing energy, next to this graphic
presentation you will find details like:
consumed current, consumed power,
consumed energy today, total of consumed
energy.
17