Advertisement
9. Motherboard has a jumper to set the fan type.
Please confirm whether jumper setting of the motherboard is correct.
< Important>
●To avoid danger and prevent malfunction, turn off the power of the server and
unplug the power plug from the outlet before performing the installation.
●Do not change the setting of other jumper pins. Doing so may cause malfunction
or failure of the server.
10. Close the side cover in reverse order of removal procedure of side cover.
11. Stick the nameplate on the bezel shown by the slant lines in the figure below.
②
①
Express model：T110i-S
30
Not install
J_DUST_B
③
Install the
Dust Proof Bezel
3 2 1
3 2 1
Advertisement
