Advertisement
8. Install the dust-proof bezel in reverse order of removal procedure of front bezel.
Caution:Be careful to do not pinch the sensor cable when attached to
the server dust-proof bezel.
< Important>
When 2.5-inch Hot Plug Drive Cage Kit is implemented, remove the door from the drive cage
kit, then install the dust-proof front bezel.
Open the door and remove the nylon-rivet,
then remove the door.
②
①
③
27
③Fix a screw
①Insert two tabs at the right of
dust-proof bezel
②
When 2.5-inch Hot Plug Drive Cage
Kit is implemented, remove the door.
①
Advertisement
Need help?
Do you have a question about the N8146-94 and is the answer not in the manual?
Questions and answers