Inputs; Sensor Inputs - Jaquet MultiTasker T601 Instruction Manual

Instruction Manual T601

3.2 Inputs

3.2.1 Sensor Inputs

Number
Frequency range (-3 dB) 0.025 Hz ... 50 kHz
Measurement range
Measurement accuracy
Resolution
(Frequency)
Input impedance
Input signal for fixed 3V
trigger (+/-15 %)
Input signal for adaptive
trigger min. 57 mVpp
(+/-10 %) 20 mV
RMS
Revision: 004
2 Sensor inputs
Programmable within the frequency range
0.002 %
10 ns
> 11.5 k
(0.1 Hz80 k, 1 kHz18.5 k, 10 kHz16 k, 50 kHz11.6 k)
•
Max. voltage: 80 V
RMS
•
Best suited to digital signals
•
Schmitt Trigger Input (Hysteresis > 1 V)
•
„0" = Low Level to 1.25 V
•
„1" = High level from 3 V (+/- 15 %)
•
Min. pulse width: 5 μs
•
Not DC-decoupled
•
Max. voltage: 80 V
•
DC-decoupled
•
The Trigger level automatically adapts itself to the input signal in the range
+28.5 mV to +2 V. The Adaptive Trigger improves the signal to noise immunity
e.g. where electromagnetic sensors are used.
Min. Trigger level: 57 mVpp +/-10% = 20 mV
1000.00
100.00
10.00
1.00
0.10
0.01
(226 V )
pp
(226 V )
RMS pp
RMS
O.K
NOT O.K.
Frequency (Hz)
+/-10% U min. = f(Frequency)
JAQUET AG
9/73