Jaquet MultiTasker T601 Instruction Manual page 66

Instruction Manual T601
B: Possible Problems
Neither green nor yellow LAN connector LED light up
Cause: No physical (electrical) connection present.
Solution: Check that a LAN Crossover cable is being used.
Cause: Tachometer is unpowered.
Solution: Check the supply connections and level.
Cause: Computer network card is switched off or de-activated (energy save mode)
• Open the Network Connections window.
Solution:
<Start>  <Settings>  <Control Panel>  <Network Connections>
• Click on the appropriate connection
• Open the Menu <File>
• Select <Deactivate>
• Re-open Menu <File>
• Select <Activate>
Yellow LAN connector LED lights but no connection to browser
Cause: Several instruments are connected to the same LAN as the tachometer.
Solution: The tachometer only functions with a <Pier to Pier> connection. Remove the other
equipment and insure that no hub, switch or router is connected between tachometer and
computer.
Cause: Computer LAN card not set correctly.
Solution: Configure the card in accordance with chapter 7 Configuration via PC Software. If that does
not solve the problem check that the network card is configured as follows:
Go to Desktop, Settings, Network connections
and right click on <Properties>. Right click on the
network card you want to use and select
<Properties>.
Revision: 004
JAQUET AG
66/73