Troubleshooting; Technical Specifications - Scandomestic WAH 1707 W User Manual

Trouble Shooting
The start of the appliance does not work or it stops during operation.
First try to find a solution to the problem, If not, contact the service cen-
tre.
Description Reason
Washing machine Door is not closed
cannot start up properly
Door can not be Washer safety pro-
opened tection design is
working
Water leakage The connection be-
tween inlet
pipe or outlet hose is
not tight
Detergent residue Detergent is damp-
in the box ened or agglomer-
ated
Indicator or display Disconnect
does not light power
PC board or harness
has
problem
Abnormal noise
Error codes:
Description
Note: After the check, activate the appliance. If the problem occurs or
the display shows other alarm codes again, contact the service.
Solution
Restart after the
door is closed
Check if the clothes
is stuck
Disconnect
power, restart the
product
Check and fasten
water pipes
Clean up outlet
hose
Clean and wipe de-
tergent
the Check if the power
is shut down and
the power plug is
connected cor-
connection
rectly
Check if the fixing
(bolts) have been
removed
Check it's installed
on a solid and level
floor
Reason Solutio
Door is not Restart after the
closed door is closed Check
properly if the clothes is stuck
Water inject- Check if the water
ing problem pressure is too low
while wash-
Straighten the water
ing
pipe
Check if the inlet
valve filter
blocked
Overtime Check if the drain
water drai- hose is blocked
ning
Water over- Restart the washer
flow
Others Please try again first,
call up
service line if there
are still troubles

Technical Specifications

Model .................................................................................. WAH 1707 W
Washing capacity ............................................................................ 7.0 kg
Dimension (HxWxD mm) .......................................... 850 x 595 x 495 mm
Net Weight ....................................................................................... 60 kg
Rated power .................................................................................. 2050W
Power Supply ................................................................. 220-240V~,50Hz
MAX.Current ...................................................................................... 10A
Standard Water Presure .................................................. 0.05MPa~1MPa
the
is