Appendix C-Engagement Arm Installation - LEADING EDGE SAFETY R2000 Instruction Manual

E
N
READ AND UNDERSTAND THE ENTIRE SET OF INSTRUCTIONS BEFORE PERFORMING ANY STEP IN THIS PROCESS
G
TOOLS NEEDED:
L
Follow steps 1– 6 of APPENDIX B to remove the Engagement Arm Shock prior to removal of the Engagement
I
Arm Assembly.
S
H
STEP 1
Insert the Bronze Bushings (18a) holes as shown.
STEP 2
Raise the Engagement Arm Assembly (6) into place, talon
side down, and align mounting holes with Bronze
Bushings (18a) as shown.
STEP 3
Insert the Clevis Pin (18b) through the Engagement Arm
Assembly (6) holes, through the Bronze Bushings,
(18a) until the Clevis Pin (18b) extends through the
opposite side.
R2000™ I
APPENDIX C—ENGAGEMENT ARM INSTALLATION
Side cutting pliers
M
NSTRUCTION
18a
18a
18a
6
6
18b
29
ANUAL