Operating Sequence; Load The Laundry; Measure Out The Detergent And The Fabric Softener; Switch The Machine On - Zanussi 132985450 Instruction Booklet

132985450.qxd 18/07/2005 17:47

Operating Sequence

Before the first wash, we recommend that you run a
cotton cycle at 95°C, without any laundry in the
machine, to remove any manufacturing residue from the
drum and tub.
Pour 1/2 a measure of detergent into the main wash
compartment of the dispenser drawer and start the
machine.

1. Load the laundry

Open the door by pulling the door handle outwards.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible.
Close the door.
2. Measure out the detergent
and the fabric softener
Pull out the dispenser drawer until it stops.
Measure out the amount of detergent required and pour
it into the main wash compartment
If you have selected the
into the compartment marked
If required, pour fabric softener into the compartment
marked (the amount used must not exceed the
"MAX" mark in the drawer). Close the drawer gently.
Pagina 11
.
option, pour detergent
PREWASH
.

3. Switch the machine on

To switch the machine on, press the O
mains-on light comes on. The display will show three
flashing dashes or ablinking zero.

4. Select the required programme

Turn the programme selector dial to the desired
position: the display will show the duration of the
selected programme.
E
E
E
The lights corresponding to the different phases making
up the selected programme light on.
5. Select the SPIN speed or RINSE
HOLD option
Depress the spin speed button to choose the required
speed or RINSE HOLD option
light comes on.
11
/O button: the
N FF
: the corresponding