• Always be sure, that there is no water leakage from hoses and their connections after the installation. • If the appliance is installed in a location subject to frost, please read the “dangers of freezing” chapter. • Any plumbing work required to install this appliance should be carried out by a qualified plumber or com- petent person.
Product description Detergent dispenser drawer Control panel Door opening handle Rating plate Drain pump Adjustable feet Detergent dispenser drawer Compartment for detergent used for prewash and soak phase or for stain remover used during the stain action phase (if available). The prewash and soak deter- gent is added at the beginning of the wash programme.
Programme selector dial SPIN reduction button OPTIONS button EXTRA RINSE button Table of symbols Night Cycle Programme selector dial, spin speed button and available options Programme Selector Dial It allows you to switch the appliance on/off and/or to select a programme. Available options: Spin By pressing this button you can change the spin speed of...
Super Quick Short cycle for lightly soiled items or for laundry which needs only freshening up. We recommend you to reduce the fabrics loading. Extra Rinse This appliance is designed for saving energy. If it neces- sary to rinse the laundry using an extra quantity of water (extra rinse), select this option.
Pull out the dispenser drawer until it stops. Measure out the amount of detergent required, pour it into the main wash compartment or in the appropriate com- partment if the selected programme/option it requires (see more details in "Detergent dispenser drawer"). If required, pour fabric softener into the compartment marked (the amount used must not exceed the...
Altering an option or a running programme It is possible to change some options before the pro- gramme carries them out. Before you make any change, you must PAUSE the ap- pliance by pressing the button 5 . Changing a running programme is possible only by re- setting it.
Rust: oxalic acid dissolved in hot water or a rust removing product used cold. Be careful with rust stains which are not recent since the cellulose structure will already have been damaged and the fabric tends to hole. Mould stains: treat with bleach, rinse well (whites and fast coloureds only).
Washing Programmes Programme - Maximum and Minimum Temperature - Cycle Description - Maximum Spin Speed - Maximum Fabrics Load - Type of Laundry COTTONS 90° - 60° Main wash - Rinses Maximum spin speed at 1400 rpm Max. load 5,5 kg - Reduced load 2,5 kg White cotton heavily or normally soiled items.
Programme - Maximum and Minimum Temperature - Cycle Description - Maximum Spin Speed - Maximum Fabrics Load - Type of Laundry HAND WASH 40° - Cold Main wash - Rinses Maximum spin speed at 900 rpm Max. load 2 kg Special programme for delicate fabrics with «hand washing»...
Programme - Maximum and Minimum Temperature - Cycle Description - Maximum Spin Speed - Maximum Fabrics Load - Type of Laundry DELICATE SPIN Drain Maximum spin speed at 700 rpm Max. load 3 kg Separate spin for hand washed garments and after programmes with the Rinse Hold or Night Cycle option selected.
Problem The washing machine does not start: The machine does not fill: The machine does not empty and/or does not spin: Possible cause/Solution The door has not been closed (the button 5 red light blinks). • Close the door firmly. The plug is not properly inserted in the power socket.
Problem There is water on the floor: Unsatisfactory washing results: The door will not open: The machine vibrates is noisy: Possible cause/Solution Too much detergent or unsuitable detergent (creates too much foam) has been used. • Reduce the detergent quantity or use another one. Check whether there are any leaks from one of the inlet hose fittings.
Problem Spinning starts late or the machine does not spin: If you are unable to identify or solve the problem, contact our service centre. Before telephoning, make a note of the model, serial number and purchase date of your machine: the Service Centre will require this information.
Programme Cottons 40° Synthetics 40° Delicates 40° Wool 30° 1) «Cottons + Economy» at 60°C with a load of 5,5 kg is the reference programme for the data entered in the energy label, in compliance with EEC 92/75 standards. The consumption data shown on this chart is to be considered purely indicative, as it may vary depending on the quantity and type of laundry, on the inlet water temperature and on the ambient temperature.
• the machine makes an unusual noise during draining due to objects such as safety pins, coins etc. blocking the pump. Proceed as follows: • disconnect the appliance; • if necessary wait until the water has cooled down. Open the pump door. Place a container close to the pump to collect any spillage.
• Screw the hose back to the machine and make sure the connection is tight. • Turn on the water tap. Frost precaution If the machine is exposed to temperatures below 0°C, certain precautions should be taken. • Turn off the water tap. •...
Open the porthole and re- Fill the smaller upper hole move the polystyrene and the two large ones block fitted on the door with the corresponding seal. plastic plug caps supplied in the bag containing the instruction booklet. Positioning Install the machine on a flat hard floor. Make sure that air circulation around the machine is not impeded by carpets, rugs etc.
Firstly form a hook in the end of the drain hose using the “U” piece” supplied. “U” piece supplied Place the drain hose into your standpipe, which should have an internal diameter of approximately 38 mm thus ensuring there is an air break between the drain hose and standpipe.
SHOWER SINK TOILET BATH WASHING DISHWASHER MACHINE RAINWATER ‘RUN-OFF’ SURFACE WATER DRAINS & SEWERS SEWAGE TREATMENT UNTREATED DISCHARGE TREATED DISCHARGE RIVER Electrical connection Any electrical work required to install this appliance should be carried out by a qualified electrician or com- petent person.
contact your local council, your household waste disposal service or the shop where you purchased the product. Packaging materials The materials marked with the symbol >PE<=polyethylene >PS<=polystyrene >PP<=polypropylene This means that they can be recycled by disposing of them properly in appropriate collection containers. Ecological hints To save water, energy and to help protect the environment, we recommend that you follow these tips:...