Care And Maintenance; Specifications - PrintDry FD1908-120 Instruction Manual

CARE AND MAINTENANCE


Turn off the dryer.

Unplug from the wall outlet.

If needed, wash the base with a soft, slightly damp cloth or sponge.

DO NOT allow water or any other liquid to get into the dryer base.

Make sure the trays and lid are completely dry before replacing them on the
base and storing.
 Any other servicing should be performed by an authorized service
representative.

4. SPECIFICATIONS

Models
Power Supply
Dryer Temperature
Weight
Dryer Dimensions
Max. Drying Time
Spool Dimensions
* The temperature inside a dryer varies due to the following factors: (1) ambient temperature; (2)
location inside a dryer; (3) how many filament spools and desiccant pouches are in the dryer.
Higher ambient temperature means higher temperature inside a dryer. The temperature in the
lower chamber is about 8°C higher than the upper chamber. The temperature inside a dryer is
higher when drying multiple filament spools and a lot of desiccant pouches.
FD1908-120, FD1908-220
110-120VAC, 60Hz, 245W (Model 1908-120)
220-240VAC, 50Hz, 245W (Model 1908-220)
35-75°C with 10°C increment ( 95-167°F)
*
3.8 Kg (8.5 lbs)
32(W) x 26(L) x 34(H) cm
48 Hours (Continuously)
Outside Diameter 100-300mm
Height 25-150mm
Mount Hole Diameter 19-58mm
Max. Weight 4Kg
- 14 -
(13x11x14")
(4-12")
(1-6")
(3/4 - 2.3")
(8.8 lbs)