Removing cylinder liners
Note:
Observe oversizes for cylinder liner
outside diameters and collar heights
(see "Service data").
D Remove cylinder head, see page 93
D Remove piston, see page 121
Fig. 1
Special tool for removing the cylinder liners.
Fig. 2
Mark the cylinder liner position relative to the
engine so that it can be reinstalled if reused.
Insert the cylinder liner extractor apparatus into the
cylinder liner, taking care not to damage the oil
spray nozzle.
Fig. 3
Fit the support on the extractor spindle and screw
on the nut.
Hold the extractor spindle in place and extract the
cylinder liner by turning the nut.
Fig. 4
Remove the extractor apparatus and take out the
cylinder liner.
Replacing cylinder liners
1
2
3
4
128