The Container Store Clybourn Sparrow Bench Assembly Instructions Manual page 10

STEP 11 STEP 12
Begin by installing all of the screws along one edge
of the back panel. Next, using a square or tape
measure, make sure that the cabinet is square.
(If using a tape measure, the distance from one
corner, diagonally to the other corner should be
the same in both directions.) Install the remaining
screws, starting with the corners.
pre-drilled
holes
H7 x 14 H8 x 2
TRUSS HEAD CAM COVER
SCREW
ASSEMBLY
PAGE 10 OF 11