Led Indicator Lights; Operation; Mimic Diagram - Honeywell Domonial CMI 800++ Installer Manual

EKZ000300C

2-3 LED indicator lights

5 LED indicators show the control panel & transmitter status.
State / Indicator
Color
Off No mains power
Slow Flashing Cover tamper opened
(2s-2s)
Quick Flashing Cover tamper
(1/4s-1/2s)
On steady Mains Power On
To comply with local rules, the signification of the LED can be different in some countries (see the User's manual).
3 - PROGRAMMING
The Domonial panel can be programmed using:
- A PDA (Palm or Pocket PC) using the DomoPDA software. The connection to the panel is made with the "CAB800Palm" cable
and the PDA's serial cable. Please see the EKZ000800 programming manual for more details.
- A PC using the "DOMOSTATION" or "DOMOPC" software depending on panel software version. The connection to the panel
is made with the "CAB800PC"
To use DOMOSTATION or DOMOPC as a remote tool, a modem "DOMODEM" has to be used. Please see the EKZ010200
programming manual for more details.
4 – OPERATION
4-1 Transmission to a DTMF telephone set
Once programmed Domonial++ can send information to a telephone set.
When a call is received and the handset is picked up the identification music is played
followed by a number of beeps corresponding to the triggered input. When several
devices have been triggered, only the first one is indicated.
After the message has been played, an acknowledgement is made by pressing the # key.
Then, if there is audio programmed, the site can be listened to remotely.
Hanging up terminates the call.
If the above configuration does not exist or if a decimal telephone is used, the message will be repeated using the programmed
sequence.
The identification music can be changed. When the DTMF remote code is even, Music 1 is played, when it is odd, Music 2 is played.

Mimic diagram

Ringing
Installer instructions / Manuel installateur - Domonial CMI 800++ 11/2005
Arm/Disarm
Mains Power
Green
No area armed
Annex or partial area
armed
opened and
transmission
in progress
Total area armed
Music 1
or music 2
Pick-up Identification
Perimeter fault
Green Red/Yellow
No fault
One or more
perimeter detectors
are open
- -
-
Beeps
Alarm
memory
Red
No alarm
Alarm memory in
annex or partial area
-
Alarm memory in
total area
Type 1 (by default)
Music 1
+ beep
Press key:
Acknowledge
Page : 8/24
Technical
alarm
Red
No technical alarm
One or more technical or
system alarm in memory
-
One or more technical
detector alarms in
progress
Type 2
Music 2
+ beep
Hang-up
Listen-in